Description

The best quality brush for this application. Nylon is flexible and supple enough to gently scrub carpets, yet has more “memory“ than other fibers for a longer lasting brush. Showerfeed block. See the “Floor Machine Equipment Reference Guide” for proper brush size and clutch plate for your machine.

https://www.majorsupply.com/product/floor-machine-equipment-reference-guide/

On brushes 14″ in diameter and larger, the two outer rows are heavier to scrub the carpet and flex the pile while the softer inner rows “massage” the dirt from the carpet for a deeper cleaning action.

How to Break in a Brush: Before using a new brush on carpeting, the brush should be broken in according to the following directions. This will eliminate possible excess drag by “tipping” the strands, removing any possible burrs caused by the manufacturing process. 

Break-in Procedure:  

1. Mount the brush on the floor machine. Follow All instructions included in your owner’s manual.
2. Find a rough textured floor surface, preferably unfinished concrete.
3. Operate the machine on this surface. Run the machine DRY for approximately 15-20 minutes. The brush fibers will take a slight set or lean in the direction of the machine rotation.
4. Rinse the brush to remove any dirt caught when running machine. The brush is now ready to be used on carpeting.