Description

197-7300 Epoxy Ester Enamel-Clear. A low VOC, heavy-duty, solventborne sealer designed for use on interior or exterior concrete, metal and wood surfaces. This one component product is epoxy ester and polyurethane modified for enhanced resistance to abrasion, marring, repeated washing and many chemicals such as oil, grease, alcohol, mild solvents, weak acids and alkalies. Ideal for floors in factories, warehouses, showrooms, and service stations and for many
other applications.                                                                                                                                 PRODUCT CHARACTERISTICS
¨ Abrasion and chemical resistant
¨ Corrosion resistant
¨ High gloss
¨ One component
¨ Low VOC solventborne
¨ Multi-surface application                                                                                                                   METHOD OF APPLICATION
Stir thoroughly and apply a generous coat without thinning by brush, lambs wool, T-bar, or spray at a rate of 300-400 sq. ft. per gallon on porous surfaces and 400-500 sq. ft. per gallon as a recoat. On highly porous surfaces, a second coat may be required. This product is dry to walk on or recoat in 24-36 hours under normal conditions. Allow 2-3 days of drying before subjecting the coating to heavy-duty use. Cool temperatures, high humidity, heavy film thicknesses, or poor ventilation will extend drying times. Clean up equipment immediately after use with mineral spirits and dry for storage. Follow solvent manufacturer’s label directions for use and recommended protective equipment.                     Available by the gallon, 2-1 gallon/case & 5 gallon/pail.