Description

Surface Barrier is a state of the art, water based Fluoropolymer Impregnator that penetrates deep into the pores of marble, limestone, granite,onyx, travertine, terrazzo, flagstone, sandstone, slate, saltillo tile, terra cotta, quarry, cantera, unglazed ceramic, pavers, grout concrete, and masonry surfaces to prevent staining. Repels water, oil, grease, food stains, mold, and mildew. For indoor or outdoor use. Allows stone to breathe. Retains stone’s natural appearance. VOC compliant. Classified by UL® for slip resistance. Use Surface Barrier on floors, kitchen countertops, showers and tubs inside and outside on stone surrounds, terraces, balustrades, and swimming pool decks. Surface must be clean and dry before application of Surface Barrier. Make sure all wax and other coatings are removed, use a heavy duty stripper to make sure all are removed. It is recommended that for newly installed slab surfaces that application is delayed for 3 to 4 weeks. Make sure grout has cured 72 hours. Thoroughly clean surface with Hurricane following the directions. Let dry 12-24 hours. Apply in thin, even coats with sprayer, paint roller, or lambs wool applicator. Work in small areas, agitate mildly with application tool. Allow to penetrate for 5-10 minutes. Re-apply and allow another 5-10 minutes for penetration. When full penetration is achieved, squeegee of any excess. Buff with white pad and move to next area to be treated. Can be walked on after one hour and cleaned after 48 hours. Covers 800-1000 square feet on polished stone and 500-800 on non-polished stone. NOTE: more porous stone may require more product.

Quarts are packaged with dispenser tops. Purchase as a single quart bottle or save on the case of 12.
Also available in 1-gallon jug and the cost-saving case of four (4) 1-gal jugs.